Our rental mounts make it quick and easy to install projectors in rental situations. With quarter-turn latches the projector is mounted onto the bracket in no time. However, the projector should be fitted with a universal rental bracket or projector specific bracket. Our tube sets are electrically insulated so that the truss does not require tape to prevent screen problems. The ball joint can easily be adjusted using the special rental ring. The tube set is fitted with lifting eyes for safety attachments.
Maximum length | 110 mm |
Weight | 1.20 kg |
Colour | Black |
Maximum load | 30 kg |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific, Universal |
Tilt function | +20° till -20° |
Rotation | 360° |
Other information | Electrical insulation, excl. Doughty Trigger Clamp (003.1128) |
Our rental mounts make it quick and easy to install projectors in rental situations. With quarter-turn latches the projector is mounted onto the bracket in no time. However, the projector should be fitted with a universal rental bracket or projector specific bracket. Our tube sets are electrically insulated so that the truss does not require tape to prevent screen problems. The ball joint can easily be adjusted using the special rental ring. The tube set is fitted with lifting eyes for safety attachments.
Minimum length | 450 mm |
Maximum length | 700 mm |
Weight | 2.95 kg |
Colour | Black |
Maximum load | 30 kg |
Height adjustment | Manual |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific, Universal |
Tilt function | +20° till -20° |
Rotation | 360° |
Cable duct | 25 mm Ø |
Other information | Electrical insulation, incl. hoist rings for safety attachments |
Our rental mounts make it quick and easy to install projectors in rental situations. With quarter-turn latches the projector is mounted onto the bracket in no time. However, the projector should be fitted with a universal rental bracket or projector specific bracket. Our tube sets are electrically insulated so that the truss does not require tape to prevent screen problems. The ball joint can easily be adjusted using the special rental ring. The tube set is fitted with lifting eyes for safety attachments.
Minimum length | 700 mm |
Maximum length | 1150 mm |
Weight | 3.95 kg |
Colour | Black |
Maximum load | 30 kg |
Height adjustment | Manual |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific, Universal |
Tilt function | +20° till -20° |
Rotation | 360° |
Cable duct | 25 mm Ø |
Other information | Electrical insulation, incl. hoist rings for safety attachments |
This mounting kit can be used in combination with the SmartMetals angled mounts to use your projector for floor projection or in portrait position. The set should be fastened in between the projector specific bracket and the ball joint, after which you can pinch the hooks to the projector mount. The mounting kit can be nicely adjusted by means of the nuts so that the projector can be used in a perfect portrait position
Weight | 1.00 kg |
Colour | Black |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific |
Other information | Suitable for products 002.1560, 002.1561, & 002.1562. |
This series can be used as a wall mount, but also as a ceiling mount for portrait and floor projection. To do so, combine the set with the portrait/floor projection kit (002.1550) and projector-specific bracket (002.1001).
Minimum length | 350 mm |
Maximum length | 650 mm |
Weight | 2.25 kg |
Colour | Black |
Maximum load | 30 kg |
Height adjustment | Manual |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific, Universal |
Tilt function | +20° till -20° |
Rotation | 360° |
Cable duct | 25 mm Ø |
Other information | Can be shortened in length (till 240 mm) |
This series can be used as a wall mount, but also as a ceiling mount for portrait and floor projection. To do so, combine the set with the portrait/floor projection kit (002.1550) and projector-specific bracket (002.1001).
Minimum length | 600 mm |
Maximum length | 1000 mm |
Weight | 3.15 kg |
Colour | Black |
Maximum load | 30 kg |
Height adjustment | Manual |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific, Universal |
Tilt function | +20° till -20° |
Rotation | 360° |
Cable duct | 25 mm Ø |
We also offer a suspension device including fine adjustment for larger projectors. With our fine adjustment screw thread mechanism it is possible to continuously pan and tilt a projector for 10 degrees. Adjustments are instant and multiple projection is easily attained, saving the valuable time of technicians on location. Fasten the projector by means of quarter turn latches (camlocks) directly to the mount. Add two trigger clamps to fasten to the truss.
Weight | 5.00 kg |
Colour | Black |
Maximum load | 25 kg (- 40 kg, after approval SmartMetals) |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific |
Tilt function | Fine adjustment +10° till -10° |
Rotation | 180° |
Other information | Electrically insulated, excl. doughty trigger clamps (003.1128) |
Besides the standard ceiling mounts we have now made available tube sets with integrated fine adjustment, especially for the heavy installation projectors. These sets are available in 3 lengths, which can be shortened on location. By means of the fine adjustment (check art. nr.: 002.1650), with screw thread, it is possible to continuously pan and tilt the projector 10 degrees from the heart of the lens. Combine this set with a projector specific bracket (art. nr. : 002.1001)
Minimum length | Can be shortened in length |
Maximum length | 1230.5 mm |
Colour | Black |
Maximum load | 25 kg (- 40 kg, after approval SmartMetals) |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific |
Tilt function | Fine adjustment +10° till -10° |
Rotation | 180° |
Cable duct | 45 mm Ø |
Besides the standard ceiling mounts we have now made available tube sets with integrated fine adjustment, especially for the heavy installation projectors. These sets are available in 3 lengths, which can be shortened on location. By means of the fine adjustment (check art. nr.: 002.1650), with screw thread, it is possible to continuously pan and tilt the projector 10 degrees from the heart of the lens. Combine this set with a projector specific bracket (art. nr. : 002.1001)
Minimum length | Can be shortened in length |
Maximum length | 2230.5 mm |
Colour | Black |
Maximum load | 25 kg (- 40 kg, after approval SmartMetals) |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific |
Tilt function | Fine adjustment +10° till -10° |
Rotation | 180° |
Cable duct | 45 mm Ø |
Besides the standard ceiling mounts we have now made available tube sets with integrated fine adjustment, especially for the heavy installation projectors. These sets are available in 3 lengths, which can be shortened on location. By means of the fine adjustment (check art. nr.: 002.1650), with screw thread, it is possible to continuously pan and tilt the projector 10 degrees from the heart of the lens. Combine this set with a projector specific bracket (art. nr. : 002.1001)
Minimum length | Can be shortened in length |
Maximum length | 3230.5 mm |
Colour | Black |
Maximum load | 25 kg (- 40 kg, after approval SmartMetals) |
Bracket/interface | Excluded |
Type bracket/interface | Projector specific |
Tilt function | Fine adjustment +10° till -10° |
Rotation | 180° |
Cable duct | 45 mm Ø |